How to Install Official Samsung Galaxy Note 3 LTE SM-N9005 Stock Rom
How to Install Official Samsung Galaxy Note 3 LTE SM-N9005 Stock Rom
If you own a Samsung Galaxy Note 3 LTE SM-N9005 and want to restore it to its original factory settings, you may need to install the official stock ROM firmware on your device. The stock ROM firmware is the software that comes pre-installed on your phone when you buy it from the manufacturer or carrier. It contains the operating system, apps, settings, and data that are optimized for your device model and region.
Installing the official stock ROM firmware on your Samsung Galaxy Note 3 LTE SM-N9005 can help you fix various issues such as bootloops, crashes, bugs, performance lags, battery drain, or even unroot your device if you have previously modified it. It can also help you update your device to the latest Android version available for your region, which is Android Lollipop 5.0 as of now.
Official Samsung Galaxy Note 3 LTE SM-N9005 Stock Rom
In this article, we will show you how to install the official stock ROM firmware on your Samsung Galaxy Note 3 LTE SM-N9005 using a simple and safe method. Before we begin, make sure you have the following requirements:
A Samsung Galaxy Note 3 LTE SM-N9005 with at least 50% battery charge.
A Windows PC with Samsung USB drivers installed. You can download them from here.
A USB cable to connect your phone to your PC.
The official stock ROM firmware file for your device model and region. You can download it from here. Make sure you choose the correct file name and OS version for your device.
The Odin flash tool to flash the firmware file on your device. You can download it from here.
Once you have all the requirements ready, follow these steps to install the official stock ROM firmware on your Samsung Galaxy Note 3 LTE SM-N9005:
Extract the firmware file and the Odin tool on your PC. You should get a .tar.md5 file and an .exe file respectively.
Turn off your phone and boot it into download mode by pressing and holding Volume Down + Home + Power buttons together for a few seconds. Release them when you see a warning screen and press Volume Up to confirm.
Run the Odin tool as administrator on your PC and connect your phone to your PC using the USB cable. You should see an "Added!" message in the Odin window and a blue or yellow box under ID:COM.
Click on the AP button in Odin and browse to the .tar.md5 file that you extracted earlier. Make sure only Auto Reboot and F. Reset Time options are checked in Odin.
Click on Start button in Odin to begin the flashing process. Do not disconnect your phone or turn off your PC during this process. You should see a green "PASS!" message in Odin when the process is completed.
Your phone will reboot automatically and install the stock ROM firmware on your device. This may take several minutes so be patient.
Once your phone boots up, you can disconnect it from your PC and enjoy the official stock ROM firmware on your Samsung Galaxy Note 3 LTE SM-N9005.
Congratulations! You have successfully installed the official stock ROM firmware on your Samsung Galaxy Note 3 LTE SM-N9005. You can now use your phone as if it was new and enjoy all the features and benefits of Android Lollipop 5.0. If you have any questions or problems, feel free to leave a comment below or visit this forum thread for more help. 0efd9a6b88
https://www.vizagnavymarathon.com/group/news-events/discussion/eae9acc7-626e-4b28-b25e-98d5369f148e
https://www.aytunga.com/group/elider/discussion/924ab932-49d0-445f-b088-3abb3c93b211